A New Modeler

I have known Andy for about 15 years., mostly through his cello music and improvisational gatherings. He has been integral to helping me establish this blog. He also takes great photos. However he had never done any modeling. A few months ago he took on making trees, with a little coaxing, as a first. As you may know, trees are always a scenic feature, especially those in foregrounds. A simple technique I use Andy is demonstrating here with medium and large plastic trees by Scenic Express. First step is to cut the plastic pin molded onto the tree base. The intent is to insert a brad for easy replanting. Once the tip is removed a hole is drilled into the base the size of the brad, and about 1/8" to 1/4" deep. There is usually plastic residue on the bit and is easily removed by simply unscrewing the plastic from the bit. The brad heads are cut off with a wire cutter. We adhere the brad into the new hole in the tree base using  blue Loctite CA glue; it is a gel. The brad extends about a 1/2" from the hole. Next step is to heat the tree to soften the plastic, then gently bend branches. The last photo shows the results. Interestingly Andy started bending the branches, AND the trunks! Although slight, it offers a more realistic contrast than every tree being boringly straight. This may sound obvious but it never came to mind. This is one good reason to have someone working on the layout that has no prior knowledge or limited thinking! You can expect new ways and approaches to any aspect of modeling.

Heating the plastic then twisting and

bending branches and trunks.

Below: final inspection before deployment into the fields 

The finished products below waiting for their paint job and foliage.