OP Session January 28, 2024

Another fun ride on the W&A, north branch! Operators included members from our ACW RRs group, Corey, Bill and DC, https://groups.io/g/CivilWarRailRoads. Another person, Glyn is a fellow board member in our NMRA Division, and Ed who is a member from our local model RR club, Garden State Central http://www.gardenstatecentral.com/

I had three train schedules prepared. However, a couple of folks couldn't make it last minute  And, I didnt even think about removing the one train. This, however, made for an interesting movement for the crew that encountered this train as it blocked their route. 

One of the compelling aspects of modeling this era is the consistent randomness of situations which were very prototypical then given the demands for both civilian and military needs and requirements.

Below, Bill is Yardmaster in Chattanooga while Ed and Glynn are preparing to depart for points south.

DC, brakeman, and Corey throttling through the Kennesaw Cut with a mixed freight of empties pulled by the W&A 4-4-0 Georgia. All names for the locomotives, as well as businesses and particular land features are consistent with the W&A line in 1863. 

Glynn and Ed taking out the Catoosa for its first run of the day, also a mixed freight with a few passenger stops scheduled along the way.

 

Operations Session

February 21 the W&A hosted its first official ops session! Long time coming it has been. We were honored to have six friends partner up in crews of two, one engineer with a brakeman. 7:00 PM crew members arrived to orient themselves to their schedules and plan their ways of working. 7:30 the clock started and everyone was completed by 9:15. Of course there were many breakdowns that were communicated to the superintendent, providing LOTS of maintenance work orders. But this is to be expected, although he (I) was more disappointed than expected. Bottom line is that it appeared all had a fabulous time.  
Engineers were responsible for operating the locos. Brakemen had responsibilities for coupling, re-railing cars when necessary and ensuring switches were set accurately. 
The schedules were challenging in that the timing of arrivals caused negotiations in order to ensure that their respective time tables were successfully met. 
The image below, with a Yankee who somehow infiltrated as a brakeman, shows Paul with Jimmy at the throttle. Shortly after this shot, another consist came barreling through with DC at the throttle causing one of those "challenging" situations. However, when considering this is 1863, trains were constantly running at all times in order to meet both military and civilian demands. Hence, this was quite prototypical. However, schedule adjustments will be made for the next session.

This next photo has brakeman Christopher questioning engineer Martin's instructions on how best to build their consist in Chattanooga. Martin is a veteran engineer and Christopher... well, this was his first time in this role. He had a steep learning curve, and did quite well.

Below, my good friend from high school and college, Dave Eberhardt, is on his maiden run as a first time brakeman with DC at the throttle. Dave had a layout in the '70's, my first experience helping to build structures and learn a few basics. Here they are building their consist in Atlanta. 

This one below is the opening of the session, two crews setting up their respective runs.

Prior to this evening, one of our favorite modelers and friends, Brian Kammerer visited. It had been quite some time since his last appearance. He did not like a bird I had set into the backdrop because of the shadow. So in his nature for clean imaging, we were able to get him to add a small flock of crows to the backdrop, the latter which he had painted in the early days of layout construction. So good it was to have his rare visit to the W&A. Here is a link to his art work http://www.cwbattlemapart.com 

DC arrived early to complete his scratch build of a prototype fire house in Chattanooga. "Look what I did!" And it is ridiculously exquisite! 

Shorty after, he wanted to see the cars he had built for his own future layout run on our W&A. All was well until he begin to uncouple. He pulled the pins, however, the links were a bit tight in the coupler pockets. As he pulled one car off it pulled the next... HO dominoes resulted! Although there were a couple of casualties, they were easily repaired. Lesson-do NOT uncouple on elevations!

This ops event was a much welcomed achievement given we've been at this since 2003! Using the hindsight factor, I would have ... but hindsight also says there is only so much planning; best is to get into it and be open to learn, adjust and have great friends to share the joy along the way.

SHAKE DOWN RUN

This was time to see just which locomotives would run reasonably well to terrible, and to detect track malfunctions as well. Two of  my club mates from the Garden State Central Model RR Club in NJ came by. Below is Jimmy flying our colors on his tee shirt. Beginning in Atlanta, he engineered the Catoosa to stops in Big Shanty and Kingston for a final stop in Dalton. However the Catoosa gave him (and me) fits of unplanned stops and stalls. 

Below, Martin is in Dalton with the famous General locomotive. He is setting up to reverse the loco on the Dalton turntable in order to run freight south over to Kingston. It was not unusual to have locomotives pulling trains but not long distances. The General has been one of the more reliable locos in my stable. For this session it had less difficulty than Jim with Catoosa.

Jim hovering over Atlanta while Martin continues his reversal.

Looking south as Martin pulls the General from the turntable. You may also notice that we use the NCE DCC system; love it!

The session was fruitful. BIG lesson, which never fails to appear, is the need to have clean track and wheels!. My frustrations ran up watching the Catoosa struggle. The next day I began troubleshooting. I realized that I although I had cleaned the main line, I had Jim and Martin running onto sidings that had not been cleaned. Pulling another loco off to inspect, I discovered the filth on the driver wheels. I am sometimes surprised if not shocked as to the amount of dirt the wheels collect in a short amount of time. However, these Mantua 4-4-0's require as much contact as possible to ensure smooth running. Although I accept the fact there will be the stalls and stops, these can be dramatically reduced by handling the Ops Session Fundamentals 101... a thorough cleaning of ALL track and wheels prior to ops sessions. But we did have fun!

Garden State Central Members Visit for a  Work Session

Jimmy, George and Jules are pards from the Garden State Central Model RR Club. We have a web site as well which I encourage you to visit. I became a member around 2003. Everything I ever heard or read about the value of such membership is accurate.  Model RR clubs offer the opportunity to accelerate the learning curve and of course you meet some fantastic people, interesting ones as well.  

This is one of the evenings GSC members come by to work their magic. I try to get these fellas here as often as possible when I am home. Since the GSC has no home members visit one anothers' layouts to either work , run or do both. Here they have converged on Chattanooga to install leads to yard tracks and wire up switch machines. Needless to say having these mates is very much appreciated to expedite layout completion. Speaking of "interesting ones", in the photo above look closely at George. You can see by that mischievous gleam in his eyes he is definitely someone to watch out for. He too has a layout we visit for work and running sessions. Jules, in the red shirt, has been building a very cool garden layout. His website on the links is posted here.

To the left is Bob Judge, one of the founding members and patriarch of the GSC club. Bob is a master at various scenicing techniques and scene building. Here is using insulation foam for contours at the approach to Chattanooga. The backdrop is Lookout Mountain by Brian Kammerrer.

On the right is Butch. Also a member of GSC he excels at kit bashing and detailing rolling stock and structures. Here he is staining ties at the south end of Dalton in preparation for ground cover, real Georgia dirt acquired near Dalton. As we look to bring Dalton to life I'll be posting our progress.